8.9.6. Proxy Settings Configuration

8.9.6.1. Introduction

This procedure describes the configuration of the proxy server (or proxy) to communicate with:

  • The MISP server

  • The GBox

  • The Gatewatcher update servers (via GUM)

Note

The GUI is described in `Proxy settings` section.

8.9.6.2. Prerequisites

  • User : member of Administrator group

8.9.6.3. Preliminary operations

8.9.6.4. Procedure to access the `Proxy settings` screen of the legacy web UI

  • In the navigation bar, click successively on:

  • The `Admin` command

  • The `Gcenter` sub menu

  • The `Configuration` command
    The `Configuration` window is displayed.
../../_images/CONFIGUR-01.PNG

  • Click on the button (4) `Proxy settings`.

8.9.6.5. Procedure to enter parameters

The following screen is displayed:

../../_images/CONFIGUR-05.PNG

  • Use the selector (1) `Enable Web Proxy` to enable or disable the use of the proxy.

  • Enter the proxy server address as an IP address or FQDN in the `Proxy address` field (2).

  • Select the GCenter network interface to use in the `Output interface` field (3).

  • Enter the Proxy Listening Port (1-65535) in the field (8) `Proxy port`.

  • If necessary, use the selector (5) `Do not use proxy for MISP`.

  • If necessary, use the selector (6) `Do not use proxy for GBOX`.

  • Use selector (7) `Do not use proxy for GUM`.

  • Press the `Save` button (9) to save current settings and update the GCenter.

Note

This mode of updating is part of the compliance of the Military Programming Act (LPM).
Therefore the entity concerned will make its updates on a dedicated update server.
For more information, please refer to the appendix regarding the specificities related to the LPM.