6.14. `Upgrade type` command

6.14.1. Introduction

The `Upgrade type` command enables selecting the appropriate upgrade option.

The options are as follows:

• `Stable only`: for versions considered stable

• `Unstable and stable`: for versions considered unstable or under development

Note

Solely the `Stable only` option is used in production.

---

6.14.2. Prerequisites

• User : setup

---

6.14.3. Preliminary operations

Depending on the situation:

• Either use Direct connection to the GCenter configuration menu via SSH

• Either use Direct connection to the GCenter configuration menu with keyboard and monitor

• Either use Direct connection to the GCenter configuration menu in HTTP via iDRAC (DELL server)

• Either use Direct connection to the GCenter configuration menu SSH via the iDRAC interface in serial port forwarding mode

---

6.14.4. Procedure

The configuration menu is displayed.

• Select the `Upgrade type` line or press the letter U

• Click on the `OK` button

  The system shows:

• The current configuration

• And, if the line is pressed, it switches to the other option.

Note

For example

The `Upgrade Type` line indicates: `Stable only`.

In this case, the upgrade will be restricted to stable versions.

• Select the `Upgrade type` line or press the U.

• Click on the `OK` button.

  The system changes the type of upgrade used.

  The `Upgrade Type` is updated: `Unstable and stable`

---