8.5.4. Installing of an upgrade
8.5.4.1. Introduction
For |
go to |
---|---|
Applying a GCenter upgrade |
|
Applying a GCap upgrade |
8.5.4.2. Prerequisites
User : member of Administrator group
8.5.4.3. Preliminary operations
Login to GCenter via a browser (see Connecting to the GCenter web interface via a web browser).
Log on to the GCap CLI.
Read the release note of the desired version to see whether any other prerequisites are required.
Download the upgrade package for the desired version from the site (https://update.gatewatcher.com/upgrade).
8.5.4.4. Procedure to apply a GCenter upgrade
- Click on the
`Software update`
command of the`Admin-GUM`
menu.The following screen is displayed. Click on the
`Parcourir`
button (8) and select the previously downloaded package.
Note
If the selected file is not an upgrade file (upgrade) but an update file (update) then um message is displayed as the following example.
An error occurred during the last gum operation : Error : Gwp file decryption error, are you sure it is a TypeGwp.SOFTWARE_UPDATE ? .
Please check your configuration/documentation. Otherwise, please contact the Gatewatcher Support.
Click on the
`Submit`
button (7).Once the package is present in the
`Saved package list`
area (1), click on the`Apply`
button.Wait until the progress bars indicate the operation was completed.
- Restart the GCenter (see the procedure in the `Restart` command)After restarting, the GCenter loaded the desired version.
8.5.4.5. Procedure to apply a GCap upgrade
On the GCenter:
Click on the`Software update`
command of the`Admin-GUM`
menu.The following screen is displayed.Click on the
`Parcourir`
button (8) and select the previously downloaded.Click on the
`Submit`
button (7).Once the package is present in the
`Saved package list`
area (1), click on the`Apply`
button.Wait until the progress bars indicate the operation was completed.
Log on to the GCap CLI:
Run the
`system upgrade list`
command to retrieve the package name Run the command`system upgrade apply packagename`
to start the upgrade.After restarting, the GCap loaded the desired version.