7.4.5. Configure filters on targeted parts of the analyzed traffic (Packet filters)
7.4.5.1. Introduction
`Packet filters`
section enables filters to be set on targeted parts of the traffic being analyzed so they are not processed.For |
go to the |
---|---|
Add a filter |
|
Change of native vlan |
7.4.5.2. Prerequisites
User : member of Operator group
7.4.5.3. Preliminary operations
Login to GCenter via a browser (see Connection to the GCenter web interface via a web browser)
7.4.5.4. Procedure to set up the filter
From the navigation bar, click successively on :
Click on the
`Packet filters`
button (7).
- Click on the
`ADD FILTER`
button (9).In the popup that appears:
Choose the desired interface - it must be enabled
In the
`Filter Type`
field, choose between`Specific VLAN`
and`Default VLAN & untagged traffic`
In the
`VLAN`
field, enter the value of the desired vlan. If the "Filter Type" field is set to`default VLAN & untagged traffic`
the box is not editable.In the
`Drop whole LAN`
field, choose whether the filter applies to the whole vlan (enable) or a part of the vlan (disable)In the
`Prefix`
field, enter the network to apply the filter to. If the`Drop whole LAN`
field is enabled, this box is not editable.In the
`Protocol`
field, enter the protocol to apply the filter to. If the`Drop whole LAN`
field is enabled, this box is not editable.In the
`Port range`
field, choose the port or port range to apply the filter to. If the`Drop whole LAN`
field is enabled, this box is not editable.Click on the
`Save`
button.
Click on the
`Apply`
button.
Note
When `Drop whole (V)LAN`
is enabled:
If the
`Filter Type`
field is set to`Specific VLAN`
, all traffic associated with this VLAN will dropIf the
`Filter Type`
field is set to`default VLAN & untagged traffic`
, all VLAN traffic associated with default and all traffic that is not part of any VLAN will be dropped
7.4.5.5. Procedure to configure the VLAN
From the navigation bar, click successively on :
Click on the
`Packet filters`
button (7).
- Click on the
`CHANGE DEFAULT VLAN`
button (8).In the popup that appears:
Choose the desired interface - it must be enabled
Enter the desired value in the
`Default VLAN`
fieldClick on the
`Save`
button
Click on the
`Apply`
button.