8.3.2. Re-pairing a GCap

8.3.2.1. Introduction

This procedure describes the re-pairing between a GCap and a GCenter.

Avertissement

When re-pairing, the VPN tunnel between the GCap and the GCenter is momentarily interrupted.
This means that during this process, data is no longer sent from the GCap to the GCenter, however, the GCap retains the data in order to send it back once the tunnel is re-established.

8.3.2.2. Prerequisites

  • User : member of Administrator group


8.3.2.3. Preliminary operations


8.3.2.4. Procedure to access the `GCaps pairing and status` window for an administrator account

  • In the navigation bar, successively click on:

  • The `Admin` button

  • The `GCaps pairing and status` command
    The `GCaps pairing and status` window is displayed.

8.3.2.5. Procedure

../../_images/GCAPS_PAIRING-03.PNG
  • Click on the `Pair again` button (7).
    The following window is displayed:
    Pair gcap-xxx again?
    Warning: this will irreversibly drop the certificate and VPN configuration on the GCenter.
    Do this only if you are sure you know what you are doing.
    
  • Check the box `Are you sure?` before validating the action.

  • Click on the `Pair again` button.
    The `SUCCESS` window is displayed showing the OTP (One Time Password).
  • Copy the OTP.

  • Click on the button `OK`.
    The GCap is now displayed in the GCap list (13).
  • Continue the operations described in the procedure Pairing a GCap with the GCenter.