6.20. `Reset` command

6.20.1. Introduction

The `Reset` command enables resetting the GCenter to its factory settings.

All configurations and data will be deleted.

---

6.20.2. Prerequisites

• User : setup

---

6.20.3. Preliminary operations

Depending on the situation:

• Either use Direct connection to the GCenter configuration menu via SSH

• Either use Direct connection to the GCenter configuration menu with keyboard and monitor

• Either use Direct connection to the GCenter configuration menu in HTTP via iDRAC (DELL server)

• Either use Direct connection to the GCenter configuration menu SSH via the iDRAC interface in serial port forwarding mode

---

6.20.4. Procedure

The configuration menu is displayed.

• Select the `Reset` line or press the letter R.

• Click on the `OK` button.

  The `Reset Gcenter Appliance` window is displayed:

  Warning
  This tool will WIPE ALL DATA.
  This means that you will loose connectivity and data.
  It will restart the GCenter automatically.
  

• Press:

• The `Yes` button to continue

• The `Cancel` button to abort.

---