8.9.2. Configuring the Netdata export interface
8.9.2.1. Introduction
This procedure describes the configuration of the Netdata interface to export system data to remote servers (Netdata, Nagios...).
Note
8.9.2.2. Prerequisites
User : member of Administrator group
8.9.2.3. Preliminary operations
Login to GCenter via a browser (see Connecting to the GCenter web interface via a web browser). with the prerequisite rights.
8.9.2.4. Procedure to access to the Legacy Web UI `Netdata Export Configuration`
screen
In the navigation bar, click successively on:
The
`Netdata Export Configuration`
page consists of 2 tabs:
The
`GENERAL`
configuration parameter management tabThe
`ENCRYPTION`
Encryption Settings Management tab
8.9.2.5. Procedure to setup the `GENERAL`
parameters
Click on the tab (1)
`GENERAL`
.Activate the elector (9)
`Enable`
.Enter the Netdata server FQDN or IP address in field (8).
Select the Netdata server listening port (4).
Select the network interface (7) to use for this connection.
Enter the Netdata server API key in field (6).
Press on the
`Save`
button (5)
8.9.2.6. Procedure to configure the `ENCRYPTION`
parameters
- Click on the button (2)
`ENCRYPTION`
.The following screen is displayed: If necessary, enable the selector (1)
`Enable TLS`
.If necessary, activate the selector (2)
`Check certificate`
.If necessary, click on the button (3)
`Browse`
to load the certificate file.Press on the
`Save`
button (4).Close the opened windows.