9.5.1. Configuring the GBox for the first connection

9.5.1.1. Introduction

Although much of the solution is already configured by the Gatewatcher teams, it is necessary to complete, at a minimum, the network configuration of the GBox in order to access the Web UI.
When connecting for the first time, it is necessary to access the GBOX via the iDRAC interface or a terminal in order to perform the network configuration.
The recommended profile is setup, the default password for this user is: default.

Important

It is essential to change this password as soon as possible.

9.5.1.2. Prerequisites

  • User : setup

  • User: member of Administrators Group

  • Connect the GBx0 network port for the management interface (for more information, see Interface network `Gbx0`).

  • If necessary, connect the network port to the GBx1 interface for connecting Gnest’s virtual machines to the Internet (for more information, see Interface network `Gbx1`).

9.5.1.3. Preliminary operations

  • Check that the LUKS key is connected to the equipment.

Note

If there is no LUKS key or if it is the wrong one, the operating system will not be able to access the contents on the hard drives.
In case of problems, check:

  • The key: it must be the right one and not one from another appliance.

  • The USB port is working properly: if necessary, change the USB port

Depending on the situation:

Note

Make sure the keyboard configuration is correct (fr or us version).

The configuration menu is displayed.

  • If necessary, select the language used for the keyboard (see `Keymap` command).

9.5.1.4. Procedure for changing the GBox's general parameters

Note

The general parameters are:

  • hostname

  • domain name

  • DNS servers (primary and secondary)

  • NTP servers (primary and secondary)

9.5.1.5. Procedure for configuring GBx0 management network interface parameters

Note

Once this initial configuration is complete, it is possible to connect to the GBox interface using a Web browser in HTTPS at the configured address.
The default users are:

  • admin

  • administrator

  • operator

For details of the rights and functions authorised to each account/group, refer to the Presentation of accounts.
For information on the various functions of the graphical administrator or operator interface, please refer to the Presentation of graphical interfaces.

9.5.1.6. Procedure for configuring the GBx1 network interface parameters of Gnest virtual machines to the Internet

9.5.1.7. Licence entry procedure

  • Follow the entry procedure in Installing an SSL certificate.
    Once the license is validated and activated, the content of the page updates and displays the details of the license.
    In the event of a missing or expired licence, the interface will automatically redirect to this page to resolve the issue.

9.5.1.8. Procedure for configuring the SSL certificate

The SSL certificate attests to the identity of the GBox and enables data exchanges to be encrypted.

9.5.1.9. Licence entry procedure

  • Follow the entry procedure in Installing an SSL certificate.
    Once the license is validated and activated, the content of the page updates and displays the details of the license.
    In the event of a missing or expired licence, the interface will automatically redirect to this page to resolve the issue.

9.5.1.10. Postliminary procedures