5.3.6. `Admin- GUM - Config` screen of the legacy Web UI

After pressing the `Config` command from the `GUM` menu, the following screen is displayed.

Marker | Name		Function
1	`Enabled`	Enables updates to be carried out in local or online mode
2	`Mode`	Enables selecting the type of update mode: local or online. Online mode enables automatic updates from Gatewatcher servers. Local mode enables updates to be made from a local repository.
3	`Time of day` field	Choosing the update time
4	`Daily`, `Weekly`, `Monthly` buttons	Selecting the frequency at which updates are triggered.
5	Source field for updates	In Online mode, this field is automatically filled in. In Local mode, this field must contain the IP address or fully qualified domain name (FQDN) of the local repository address.
6	`Username` field	In Online mode, login field for connecting to Gatewatcher servers In local mode, local repository login field
7	`Password` field	In Online mode, field for password to connect to Gatewatcher servers In Local mode, field for the local repository password
8	`Update GUM configuration` button	Updates the GUM configuration

This screen enables configuring the automatic scheduling of updates.

These updates can be made:

• Via Online mode

  If necessary, configure a proxy (see the Configuring a proxy procedure)

  Online mode enables automatic updates to be made from the Internet.

  The URL field will be filled in automatically. The update packages can be obtained from the Gatewatcher servers https://update.GATEWATCHER.com/update/.
• Via the Local mode

  If necessary, configure a proxy (see the in Configuring a proxy procedure)

  Local mode enables updates to be made from a local repository previously configured to download packages from Gatewatcher servers https://update.GATEWATCHER.com/update.

  This local repository is defined in the `Admin- GUM - Config` screen of the legacy Web UI.

An intelligence account will be required for the update package to be downloaded from the site.

In `online` mode, this user and password pair must be entered in the `Username` and `Password` fields below the address.

For installation instructions, please refer to Configuring automatic updates via GUM.

---