7.6. `Keymap` command

7.6.1. Introduction

The `Keymap` command enables switching the keyboard language between US and FR.

7.6.2. Prerequisites

User : setup

7.6.3. Preliminary operations

Depending on the situation:

either use the SSH access to the configuration menu
either use the Direct connection to the configuration menu with a keyboard and monitor
either use the HTTP access to the configuration menu via iDRAC (DELL server)
either use the SSH access to the configuration menu via the iDRAC interface in serial port redirection mode

7.6.4. Procedure

The configuration menu is displayed.

The system shows:

The current configuration

And, if the line is pressed, the switch to the other language.

For example: the `Keymap` line shows: `Now using [US]. Switch to FR`.

In this case, the current keyboard language is US.

Select the `Keymap` line or press the letter K.
Click on the `OK` button.

The system changes the keyboard language.

The `Keymap` line is updated: `Now using [FR]. Switch to US`
Press the `OK` key to return to the menu.