6.5. How to administer the GBox: setup or Administrators level
6.5.1. Accessing the GBox
To perform the following task |
# |
Carry out the following procedures in succession |
Reserved for the group |
---|---|---|---|
First connection by a direct connection |
1 |
Direct connection to the configuration menu with a keyboard and monitor |
setup |
Remote HTTP connection via iDRAC |
1 |
HTTP access to the configuration menu via iDRAC (DELL server) |
setup |
Remote connection to the configuration menu using SSH via the iDRAC interface |
1 |
SSH access to the configuration menu via the iDRAC interface in serial port redirection mode |
setup |
Direct connection to the configuration menu using SSH |
1 |
setup |
|
Connection to GBox via a web browser |
1 |
All accounts |
6.5.2. Configuring the GBOX
To perform the following task |
Carry out the following procedures in succession |
|
---|---|---|
Initial installation |
1 |
Procedure in Configuring the GBox for the first connection |
2 |
Procedure in Operating a GBox |
|
Keyboard configuration |
1 |
Use of the `Keymap` command |
Changing the licence |
1 |
Procedure in Modifying the licence |
Putting a GBox into operation |
1 |
Procedure in Operating a GBox |
Changing the SSL certificate |
1 |
Procedure in Installing an SSL certificate |
6.5.3. Managing Web UI accounts
To perform the following task |
Carry out the following procedures in succession |
|
---|---|---|
Creating a local user |
1 |
|
Changing some of a local user's information |
1 |
|
Changing the current account password |
1 |
|
Resetting a local user's password |
1 |
|
Deleting a local user |
1 |
|
Viewing the authentication history |
1 |
|
Viewing the history of user creations or deletions |
1 |
|
Viewing the history function for all changes in user rights |
1 |
6.5.5. Managing network
To perform the following task |
Carry out the following procedures in succession |
|
---|---|---|
Viewing the current configuration of the GBox |
1 |
|
2 |
||
Viewing the configuration of each network interface |
1 |
|
2 |
||
Modifying the general parameters of the GBox |
1 |
|
2 |
||
Managing the interface parameters GBx0 management network |
1 |
|
2 |
Apply the Procedure for modifying the network interface parameters for the GBx1 interface |
|
3 |
||
GBx1 network interface configuration of Gnest virtual machines to the Internet |
1 |
|
2 |
Procedure for accessing the Sandbox services of the Gnest engine |
|
3 |
||
4 |
||
5 |
Apply the Procedure for modifying the network interface parameters for the GBx1 interface |
|
6 |
||
7 |
Enable the |
6.5.6. Managing the analysis engines
To perform the following task |
Carry out the following procedures in succession |
|
---|---|---|
Configuring the Gnest engine (changing the number of virtual machines) |
1 |
|
2 |
Modification of existing templates to take account of this new configuration: Procedure to configure the Gnest engine |
|
Configuring the Gmalcore engine |
1 |
|
2 |
Modification of existing templates to take account of this new configuration: Procédure to configure the Gmalcore engine |
|
Monitoring of analysis engines |
1 |
6.5.7. Managing the GBox server
To perform the following task |
# |
Carry out the following procedures in succession |
---|---|---|
Exit the current session or leave the SSH session |
1 |
Use the `Exit` command |
System: restart the GBox |
1 |
Use the `Restart` command |
System: shut down the GBox |
1 |
Use the `Shutdown` command |
Delete the data and return the GBox to its factory settings. |
1 |
Use the `Reset` command |
Malcore services: force restart or reinstallation |
1 |
Use the `Services` command |
Restart the applications |
1 |
Use the `Gapps` command |
6.5.8. Managing the analysis templates
To perform the following task |
# |
Carry out the following procedures in succession |
---|---|---|
Create new templates |
1 |
|
Managing templates |
1 |
6.5.9. Monitoring the GBox
To perform the following task |
# |
Carry out the following procedures in succession |
---|---|---|
Monitoring: loading files for diagnosis |
1 |
6.5.10. Using the API
To perform the following task |
# |
Carry out the following procedures in succession |
---|---|---|
Connection to the Wef interface via a browser |
1 |
|
Creation or deletion of an API access token |
1 |
|
Use of an API endpoint |
1 |
6.5.11. Managing the software via GUM
To perform the following task |
Carry out the following procedures in succession |
|
---|---|---|
Updating engines |
1 |
If necessary, configure the proxy (local mode): see the procedure in Configuring a proxy |
2 |
Depending on the method (local or online), apply the corresponding procedure Configuring automatic updates via GUM |
|
3 |
Check that the update is working correctly with Manual installation of a signature update |
|
Installing a patch (Hotfix) |
1 |
|
Installing an upgrade |
1 |