1. Network Settingd

The network configuration of the equipment is done from the 'Network' tab. :

↓ →

From this tab, 'Show Current configuration', the administrator checks the network information of the GCap. The configuration of the network interfaces of the probe is displayed.

You can do it with the following CLI command :

show network-config configuration

From the 'Show interfaces status' tab, the visualization of the capture and management interfaces is possible. All equipment interfaces are displayed statically (type of links, network connector speed, status, MAC address).

↓

You can do it with the following CLI command :

show network-config status
show monitoring-interfaces