2. Turn up IPsec tunnel

_images/MoteurDeDetectionOFF.png

After the previous step you will be asked to fill the OTP token in pairing field. This process will allow you to turn up the IPsec tunnel between GCap and GCenter

_images/SAPP3.PNG ↓
_images/SAPP4.PNG

The pairing menu is only available after filling the GCenter IP. During the process, you will be asked to check the footprint of GCenter.

The footprint must be the same as the one in the GCenter WEB UI.

_images/SAPP5.PNG
↓
_images/SAPP6.PNG

The OTP token will be provided after adding the GCap in your GCenter.

_images/SAPP7.PNG

After pairing the GCenter and the GCap, the IPsec tunnel status should be turned to up on your GCenter.

_images/SAPP8.PNG ↓ _images/SAPP9.PNG _images/SAPP10.PNG

You can do it with the following CLI command :

show status
pairing fingerprint [y|n] otp [*****************]