6.7. `Keyboard` command

6.7.1. Introduction

The `Keyboard` command declares the language of the keyboard used:

• choice EN for English keyboard

• choice FR for a French keyboard

---

6.7.2. Prerequisites

• User : setup

---

6.7.3. Preliminary operations

Depending on the situation:

• Either use Direct connection to the GCenter configuration menu via SSH

• Either use Direct connection to the GCenter configuration menu with keyboard and monitor

• Either use Direct connection to the GCenter configuration menu in HTTP via iDRAC (DELL server)

• Either use Direct connection to the GCenter configuration menu SSH via the iDRAC interface in serial port forwarding mode

---

6.7.4. Procedure

The configuration menu is displayed.

The system shows:

• The current configuration

• And, if the line is pressed, the switch to the other language.

  For example: the `Keyboard` line shows: `Now using [EN]. Switch to FR`.

  In this case, the keyboard used is declared as EN keyboard (English).

• Select the `Keyboard` line or press the letter K.

• Click on the `OK` button.

  The system changes the keyboard language.

  In this case, the keyboard used is declared as keyboard FR (French).

---