6.2.1.10. gcenter-ip

6.2.1.10.1. Introduction

The gcenter-ip command of the show subgroup enables displaying the IP address of the GCenter with which the GCap is paired.

---

6.2.1.10.2. Prerequisites

• User: setup

• Dependencies:

  • the detection engine must be switched off

  • a GCenter must be paired

---

6.2.1.10.3. Command

show gcenter-ip

---

6.2.1.10.4. Example

• Enter the following command.

(gcap-cli) show gcenter-ip

• Validate.

The system displays the IP address of the paired GCenter.

Current GCenter IP: X.X.X.X

If there is no paired Gcenter then the following message is displayed:

Current GCenter IP: None