1.2. GTap presentation
The GTap model GTAP_O_MM duplicates the network flow connected to the
`NET` ports towards the `TAP` ports.The GTAP_O_MM is identified by two distinct references:
GTAP_O850_1P_5050
GTAP_O850_1P_6040
The GTap takes the following form:
1.2.1. GTap input/output list
The GTap_O_MM has a total of three duplex LC ports (Lucent Connector):
The network ports to be monitored:
`NET A`and`NET B`The port to be connected to the sensing probe:
`TAP AB`
Item |
Description |
|---|---|
1 |
NET A: Tap input port connected to the network to be monitored |
2 |
NET B: Tap input port connected to the network to be monitored |
3 |
TAP AB: Tap output port connected to the sensing probe |
Note
Apply the good practices for inserting a Tap on a network.
If necessary, contact the Gatewatcher support or your usual Gatewatcher contact.
1.2.2. Security seal
The GTap also has one security seal, located on the front side:
Item |
Description |
|---|---|
1 |
Seal n°1 |