9.3.2.14. set advanced-configuration rescan-interfaces

A - Introduction

The `rescan-interfaces` command of the `set advanced-configuration` sub-group enables:

• scanning network interfaces

• synchronizing the detected network interfaces with the predefined names in the system

This command is particularly useful if the interfaces are misnamed or out of order. This can happen in some cases with old or unrecognized material.

---

B - Prerequisites

• User: setup

• Dependencies: the detection engine must be switched off

---

C - Procedure to scan the GCap interfaces without rebooting

Note

Interfaces being potentially unassigned, access via the SSH connection may not work.

So only physical access or via the management console (iDrac) access are possible.

The command prompt is displayed.

(gcap-cli)

1. Enter the command

   set advanced-configuration rescan-interfaces no-reboot
   

2. Validate

   Operation successful
   

---