9.3.2.2. set compatibility-mode

A - Introduction

The `compatibility-mode` command of the `set` sub-group enables modifying the compatibility mode used to interact with GCenter.
The compatibility mode will affect the available functionality of GCap.

Several compatibility modes are available:

  • 2.5.3.102 : GCenter 2.5.3.102

  • 2.5.3.103 : GCenter 2.5.3.103

    For a
    GCap
    Version
    GCenter

    supported
    Action or
    Command to be executed

    2.5.4.1

    2.5.3.101 HF4

    unsupported

    GCenter to migrate to a newer version

    2.5.4.1

    2.5.3.102 HF3

    supported

    set compatibility-mode 2.5.3.102

    2.5.4.1

    2.5.3.103

    supported

    set compatibility-mode 2.5.3.103

Important

The above table is given as an example. Please refer to the GCap Release Note.

Note

The compatibility mode for GCenter version 2.5.3.101 and below is deprecated.

B - Prerequisites

  • User: setup

  • Dependencies: the detection engine must be switched off

C - Command

`set compatibility-mode {2.5.3.102|2.5.3.103}`

D - Procedure to configure the compatibility between a GCap version V2.5.4.0 with a GCenter 2.5.3.102

The command prompt is displayed.

(gcap-cli)

  1. Enter the command

    set compatibility-mode 2.5.3.102

  2. Validate