6.2.1.11. health

6.2.1.11.1. Introduction

The health command of the show subgroup enables displaying statistics and the health information of the GCap.

6.2.1.11.2. Prerequisites

Users: setup, gviewadm
Dependencies: N/A

6.2.1.11.3. Command

show health

6.2.1.11.4. Example

Enter the following command.
```
(gcap-cli) show health
```
Validate.
The system displays the following information:
- block counters - Mass storage statistics
- cpu_stats counters - Processor statistics
- disks counters - Mount point occupancy statistics
- emergency counters - GCap emergency mode information
- gcenter counters - Paired GCenter information
- high_availability counters - High Availability (HA) information
- interfaces counters - Statistics on network interfaces
- loadavg counters - Statistics on the average load of the GCap
- meminfo counters - Statistics on the RAM
- numastat counters - Non Uniform Memory Access (NUMA) node statistics
- sofnet counters - Statistics on received packets according to processor cores
- suricata counters - Sigflow (monitoring-engine) information
- systemd counters - System initialisation information
- uptime counters - Uptime
- virtualmemory counters - Swap space information (swap)

6.2.1.11.4.1. `block` counters details - Mass storage statistics

sdN - Disk statistics N where N is a letter of the alphabet
- read_bytes - Bytes read since startup
- written_bytes - Bytes written since startup
Example:

    {
     "block": {
        "sda": {
            "read_bytes": 302867968,
            "written_bytes": 4837645312
        },
        "sdb": {
            "read_bytes": 3894272,
            "written_bytes": 4096
        }
    },
   

6.2.1.11.4.2. `cpu_stats` counter details - CPU statistics

cpus - CPU usage statistics

cpu - Overall core usage statistics
cpuX - CPU X core statistics
- idle - Elapsed time doing nothing in milliseconds
- iowait - Elapsed time waiting for disk operations in milliseconds
- irq - Elapsed time on material IRQs
- nice - Time elapsed in user space on low priority processes in milliseconds
- softirq - Elapsed time on hardware IRQs in milliseconds
- system - Elapsed time in kernel space in milliseconds
- user - Elapsed time in user space in milliseconds
interrupts - Number of interrupts since startup
processes_blocked - Number of blocked or dead processes
processes_running - Number of running processes

Example:

"cpu_stats": {
    "cpus": {
        "cpu": {
            "idle": 961816208,
            "iowait": 11419,
            "irq": 0,
            "nice": 0,
            "softirq": 397899,
            "system": 21788203,
            "user": 50806194
        },
        "cpu0": {
            "idle": 79960857,
            "iowait": 985,
            "irq": 0,
            "nice": 0,
            "softirq": 234748,
            "system": 1795880,
            "user": 4357374
        },
        "cpu1": {
            "idle": 80166571,
            "iowait": 951,
            "irq": 0,
            "nice": 0,
            "softirq": 88078,
            "system": 1830370,
            "user": 4138182
        }
    },
    "interrupts": 12942835029,
    "processes_blocked": 0,
    "processes_running": 1
},

6.2.1.11.4.3. `disks` counters details - Mount point occupancy statistics

/mountpoint/path - Mount point path

block_free - Number of free blocks
block_total - Total number of blocks
inode_free - Number of remaining inodes
inode_total - Total number of inodes

Example:

"disks": {
    "/": {
        "block_free": 247909,
        "block_total": 249830,
        "inode_free": 64258,
        "inode_total": 65536
    },
    "/data": {
        "block_free": 7150076,
        "block_total": 7161801,
        "inode_free": 1827417,
        "inode_total": 1827840
    },
},

6.2.1.11.4.4. `emergency` Counters details - GCap emergency mode information

emergency_active - Active or inactive status of the emergency mode

Example:

  "emergency": {
      "emergency_active": false
  },

6.2.1.11.4.5. `gcenter` Counters details - Paired GCenter information

chronyc_sync - Status of the NTP synchronisation with the GCenter
reachable - GCenter reachable or not (false)

Example:

 "gcenter": {
     "chronyc_sync": false,
     "reachable": false
 },

6.2.1.11.4.6. `high_availability` counters details - High Availability (HA) information

healthy - HA health status
last_status - Last known HA status
last_transition - Date of last known HA status change in ISO8601 format
leader - True for a GCap leader, false for a GCap follower
status - Active or inactive (false) status of the HA

Example:

    "high_availability": {
        "healthy": false,
        "last_status": -1,
        "last_transition": "0001-01-01T00:00:00Z",
        "leader": false,
        "status": false
    },

6.2.1.11.4.7. `interfaces` counter details - Statistics on network interfaces

bond0 - Name of the network interface
- rx_bytes - Number of bytes received
- rx_drop - Number of bytes lost in reception
- rx_errs - Number of invalid bytes received
- rx_packets - Total number of packets received from this interface
- tx_bytes - Number of bytes sent
- tx_drop - Number of bytes lost while sending
- tx_errs - Number of invalid bytes sent
- tx_packets - Total number of packets sent from this interface

Example:

    "interfaces": {
        "bond0": {
            "rx_bytes": 0,
            "rx_drops": 0,
            "rx_errs": 0,
            "rx_packets": 0,
            "tx_bytes": 0,
            "tx_drops": 0,
            "tx_errs": 0,
            "tx_packets": 0
        },
        "gcp0": {
            "rx_bytes": 138433006,
            "rx_drops": 82901,
            "rx_errs": 0,
            "rx_packets": 2143236,
            "tx_bytes": 796294,
            "tx_drops": 0,
            "tx_errs": 0,
            "tx_packets": 3635
        },
        "gcp1": {
            "rx_bytes": 137642525,
            "rx_drops": 82902,
            "rx_errs": 0,
            "rx_packets": 2135060,
            "tx_bytes": 0,
            "tx_drops": 0,
            "tx_errs": 0,
            "tx_packets": 0
        }
    },

6.2.1.11.4.8. `loadavg` counter details - Statistics on the average load of the GCap

active_processes - Number of processes started
load_average_15_mins - Average load over the last fifteen minutes
load_average_1_min - Average load over the last minute
load_average_5_mins - Average load over the last five minutes
running_processes - Number of running processes

Example:

    "loadavg": {
        "active_processes": 561,
        "load_average_15_mins": 0.99,
        "load_average_1_min": 0.67,
        "load_average_5_mins": 1,
        "running_processes": 2
    },

6.2.1.11.4.9. `meminfo` counter details - Statistics on the RAM

available - Total physical memory in kilobytes
buffers - Memory used by disk operations in kilobytes
cached - Memory used by the cache in kilobytes
dirty - Memory used by pending write operations in kilobytes
free - Unused memory in kilobytes
hugepages_anonymous - Number of anonymous transparent huge pages used
hugepages_free - Number of available transparent huge pages
hugepages_reserved - Number of reserved transparent huge pages
hugepages_shmem - Number of shared transparent huge pages
hugepages_surplus - Number of extra transparent huge pages
hugepages_total - Total number of huge pages
kernel_stack - Memory used by kernel stack allocations in kilobytes
page_tables - Memory used for page management in kilobytes
s_reclaimable - Cache memory that can be reallocated in case of memory shortage in kilobytes
shmem - Memory used by shared pages in kilobytes
slab - Memory used by kernel data structures in kilobytes
swap_cached - Memory used by the swap cache in kilobytes
swap_free - Available memory in swap in kilobytes
swap_total - Total swap memory in kilobytes
total - Total memory in kilobytes
v_malloc_used - Memory used by large memory areas allocated by the kernel

For more information, please refer to this documentation meminfo.

Example:

    "meminfo": {
        "available": 13608896,
        "buffers": 380932,
        "cached": 1155824,
        "dirty": 28,
        "free": 13128080,
        "hugepages_anonymous": 423936,
        "hugepages_free": 0,
        "hugepages_reserved": 0,
        "hugepages_shmem": 0,
        "hugepages_surplus": 0,
        "hugepages_total": 0,
        "kernel_stack": 9152,
        "page_tables": 8400,
        "s_reclaimable": 43168,
        "shmem": 794564,
        "slab": 210008,
        "swap_cached": 0,
        "swap_free": 16777212,
        "swap_total": 16777212,
        "total": 15977468,
        "v_malloc_used": 66592
    },

6.2.1.11.4.10. `numastat` counter details- Non Uniform Memory Access (NUMA) node statistics

nodes - List of NUMA nodes
- nodeX - NUMA X node statistics
  - interleave_hit - Interleaved memory successfully allocated in this node
  - local_node - Memory allocated in this node while a process was running on it
  - numa_foreign - Memory planned for this node, but currently allocated in a different node
  - numa_hit - Memory successfully allocated in this node as expected
  - numa_miss - Memory allocated in this node despite process preferences. Each numa_miss has a numa_foreign in another node
  - other_node - Memory allocated in this node while a process was running in another node

Example:

    "numastat": {
        "nodes": {
            "node0": {
                "interleave_hit": 3871,
                "local_node": 4410557829,
                "numa_foreign": 0,
                "numa_hit": 4410454203,
                "numa_miss": 0,
                "other_node": 14170
            },
            "node1": {
                "interleave_hit": 3869,
                "local_node": 4224990850,
                "numa_foreign": 0,
                "numa_hit": 4224964539,
                "numa_miss": 0,
                "other_node": 21531
            }
        }
    },

6.2.1.11.4.11. `sofnet` counter details - Statistics on received packets according to processor cores

cpus - Usage statistics per CPU
- cpuX - CPU X core statistics
  - backlog_len -
  - dropped - Number of packets dropped
  - flow_limit_count - Number of times the throughput limit was reached
  - processed - Number of packets processed
  - received_rps - Number of times the CPU was woken up
  - time_squeeze - Number of times the thread could not process all the packets in its backlog within the budget
- summed - Overall core usage statistics
  - backlog_len -
  - dropped - Number of packets dropped
  - flow_limit_count - Number of times the throughput limit was reached
  - processed - Number of packets processed
  - received_rps - Number of times the CPU was woken up
  - time_squeeze - Number of times the thread could not process all the packets in its backlog within the budget

Example:

    "softnet": {
        "cpus": {
            "cpu0": {
                "backlog_len": 0,
                "dropped": 0,
                "flow_limit_count": 0,
                "processed": 448550,
                "received_rps": 0,
                "time_squeeze": 2
            },
            "cpu1": {
                "backlog_len": 0,
                "dropped": 0,
                "flow_limit_count": 0,
                "processed": 36250,
                "received_rps": 0,
                "time_squeeze": 0
            }
        },
        "summed": {
            "backlog_len": 0,
            "dropped": 0,
            "flow_limit_count": 0,
            "processed": 5239450,
            "received_rps": 0,
            "time_squeeze": 27
        }
    },

6.2.1.11.4.12. `Sigflow` counter details - Sigflow (monitoring-engine) information

detailed_status - Sigflow container status

up - Status of Sigflow and the detection engine

detailed_status + status "up"	signification
status "Container down" + "up" false	status engine off
status "Container down" + "up" true	impossible status: device cannot be rotated in a disabled container
status "Container UP" + "up" false	unstable status: call GATEWATCHER support
status "Container UP" + "up" true	status engine on

Example:

    "suricata": {
        "detailed_status": "Container down",
        "up": false
    },

6.2.1.11.4.13. `systemd` counter details - System initialisation information

failed_services - List of failed services reported by systemctl --failed.

Example:

    "systemd": {
        "failed_services": [ "netdata.service" ]
    },

6.2.1.11.4.14. `uptime` counter details - Uptime

up_seconds - Number of seconds since start-up.

Example:

    "uptime": {
        "up_seconds": 874179.8
    },

6.2.1.11.4.15. `virtualmemory` counter details - Swap space information (swap)

disk_in: Number of pages saved to disk since start-up.
disk_out - Number of pages out of disk since start-up.
pagefaults_major - Number of page faults per second.
pagefaults_minor - Number of page faults per second to load a memory page from disk to RAM.
swap_in - Number of kilobytes the system swapped from disk to RAM per second.
swap_out - Number of kilobytes the system swapped from RAM to disk per second.

Example:

    "virtualmemory": {
        "disk_in": 307828,
        "disk_out": 4724267,
        "pagefaults_major": 1210,
        "pagefaults_minor": 14233474300,
        "swap_in": 0,
        "swap_out": 0
    }

6.2.1.11. health

6.2.1.11.1. Introduction

6.2.1.11.2. Prerequisites

6.2.1.11.3. Command

6.2.1.11.4. Example

6.2.1.11.4.1. block counters details - Mass storage statistics

6.2.1.11.4.2. cpu_stats counter details - CPU statistics

6.2.1.11.4.3. disks counters details - Mount point occupancy statistics

6.2.1.11.4.4. emergency Counters details - GCap emergency mode information

6.2.1.11.4.5. gcenter Counters details - Paired GCenter information

6.2.1.11.4.6. high_availability counters details - High Availability (HA) information

6.2.1.11.4.7. interfaces counter details - Statistics on network interfaces

6.2.1.11.4.8. loadavg counter details - Statistics on the average load of the GCap

6.2.1.11.4.9. meminfo counter details - Statistics on the RAM

6.2.1.11.4.10. numastat counter details- Non Uniform Memory Access (NUMA) node statistics

6.2.1.11.4.11. sofnet counter details - Statistics on received packets according to processor cores

6.2.1.11.4.12. Sigflow counter details - Sigflow (monitoring-engine) information

6.2.1.11.4.13. systemd counter details - System initialisation information

6.2.1.11.4.14. uptime counter details - Uptime

6.2.1.11.4.15. virtualmemory counter details - Swap space information (swap)

6.2.1.11.4.1. `block` counters details - Mass storage statistics

6.2.1.11.4.2. `cpu_stats` counter details - CPU statistics

6.2.1.11.4.3. `disks` counters details - Mount point occupancy statistics

6.2.1.11.4.4. `emergency` Counters details - GCap emergency mode information

6.2.1.11.4.5. `gcenter` Counters details - Paired GCenter information

6.2.1.11.4.6. `high_availability` counters details - High Availability (HA) information

6.2.1.11.4.7. `interfaces` counter details - Statistics on network interfaces

6.2.1.11.4.8. `loadavg` counter details - Statistics on the average load of the GCap

6.2.1.11.4.9. `meminfo` counter details - Statistics on the RAM

6.2.1.11.4.10. `numastat` counter details- Non Uniform Memory Access (NUMA) node statistics

6.2.1.11.4.11. `sofnet` counter details - Statistics on received packets according to processor cores

6.2.1.11.4.12. `Sigflow` counter details - Sigflow (monitoring-engine) information

6.2.1.11.4.13. `systemd` counter details - System initialisation information

6.2.1.11.4.14. `uptime` counter details - Uptime

6.2.1.11.4.15. `virtualmemory` counter details - Swap space information (swap)