6.2.1.10. gcenter-ip

6.2.1.10.1. Introduction

The gcenter-ip command of the show subgroup enables displaying the IP address of the GCenter with which the GCap is paired.

6.2.1.10.2. Prerequisites

User: setup
Dependencies:
- the detection engine must be switched off
- a GCenter must be paired

6.2.1.10.3. Command

show gcenter-ip

6.2.1.10.4. Example

Enter the following command.
```
(gcap-cli) show gcenter-ip
```
Validate.
The system displays the IP address of the paired GCenter.
```
Current GCenter IP: X.X.X.X
```
If there is no paired Gcenter then the following message is displayed:
```
Current GCenter IP: None
```