9.3.3.5. system upgrade

A - Introduction

The `upgrade` command of the `system` sub-group enables upgrading the sensor to a new version.

---

B - Prerequisites

• User: setup

• Dépendances :

  • the detection engine must be switched off

---

C - Command

`system upgrade`

---

D - Procedure to put a GCap into operation

The command prompt is displayed.

(gcap-cli)

1. Enter the following command to list available packages on GCenter.

   system upgrade list
   

2. Validate

3. Enter the following command to upgrade the sensor

   system upgrade apply '[package_name]' confirm
   

4. Validate

   At the end of the operation sensor will restart

   The SSH connection will be interrupted

---