9.3.3.2. system restart

A - Introduction

The `restart` command of the `system` sub-group enables restarting the GCap.

If before startup the detection engine is activated (UP status), it will be activated after startup.

If the GCap is paired with the GCenter before startup, it will be paired after startup.

---

B - Prerequisites

• User: setup

• Dependencies: none

---

C - Command

`system restart`

---

D - Procedure to restart a GCap

The command prompt is displayed.

(gcap-cli)

1. Enter the command

   system restart
   

2. Validate

   The SSH connection will be interrupted

---