6.2.1.5. compatibility-mode
6.2.1.5.1. Introduction
The compatibility-mode
command of the show
subgroup enables displaying the current compatibility mode to interact with GCenter.
The compatibility mode will affect the available functionality of GCap.
Several compatibility modes are available:
2.5.3.100: GCenter 2.5.3.100 and below
2.5.3.101: GCenter 2.5.3.101
2.5.3.102+: GCenter 2.5.3.102 and above
The current mode must be selected based on the current GCap and GCenter versions.
For more information, refer to the compatibility table.
Note
The compatibility mode for GCenter version 2.5.3.100 and below is deprecated.
6.2.1.5.2. Prerequisites
User: setup
Dependencies: the detection engine must be switched off
6.2.1.5.3. Command
show compatibility-mode
6.2.1.5.4. Example for displaying the current compatibility mode
Enter the following command.
(gcap-cli) show compatibility-mode
Validate.
The system displays the current compatibility mode.Current compatibility mode: 2.5.3.102+
For a GCap V106 or V107 version, this is the recommended mode.
---