6.2.2.5. gcenter-ip

6.2.2.5.1. Introduction

The gcenter-ip command of the set subgroup enables specifying the IP address of the GCenter to which the GCap will be paired.

Note

The GCap uses this IP address during pairing to connect to the GCenter via SSH and retrieve the GCenter fingerprint.

---

6.2.2.5.2. Prerequisites

• User: setup

• Dependencies: the detection engine must be switched off

---

6.2.2.5.3. Command

set gcenter-ip {GCenter-IP}

---

6.2.2.5.4. Example

• Enter the following command.

  (gcap-cli) set gcenter-ip 192.168.1.1
  

• Validate.
  The system displays the result.

  Setting GCenter IP to 192.168.1.1
  

---