6.2.2.16.6. mtu (Maximum Transfert Unit)
6.2.2.16.6.1. Introduction
The mtu
command in subgroup set advanced-configuration
enables displaying changing the MTU byte value of enabled network interfaces (mon0
, mon1
, ... monx
, gcp0
, gcp1
, clusters).
This value must be between 1280
and 9000
bytes.
Note
Load Balancing and XDP Filtering features are not supported if the MTU > 3000.
6.2.2.16.6.2. Prerequisites
User: setup
Dependencies: the detection engine must be switched off
6.2.2.16.6.3. Command
set advanced-configuration mtu {mon0|mon1|mon2|mon3|monvirt}
6.2.2.16.6.4. Example of changing the MTU value of the mon1
interface
Enter the following command.
(gcap-cli) set advanced-configuration mtu mon1 1500
Validate.
The system displays the result.
Updating Network MTU configuration to: - mon1: 1500