1.2. GTap presentation
The GTap model GTAP_O_SM consists of a Tap that duplicates the network flow connected to ports
`A` and `B`.The GTAP_O_SM is identified by four distinct references:
GTAP_O1310_1P_5050
GTAP_O1310_1P_6040
GTAP_O1550_1P_5050
GTAP_O1550_1P_6040
The GTap takes the following form:
1.2.1. GTap input/output list
The GTap_O_SM has a total of three duplex LC ports (Lucent Connector):
The network ports to be monitored:
`A`and`B`The port to be connected to the sensing probe:
`AB`
Item |
Description |
|---|---|
1 |
AB: Tap output port connected to the sensing probe |
2 |
A: Tap input port connected to the network to be monitored |
3 |
B: Tap input port connected to the network to be monitored |
Note
Apply the good practices for inserting a Tap on a network.
If necessary, contact the Gatewatcher support or your usual Gatewatcher contact.
1.2.2. Security seals
The GTap also has three security seals, located on the right-hand side of the equipment:
Item |
Description |
|---|---|
1 |
Seal n°1 |
2 |
Seal n°2 |
3 |
Seal n°3 |