9.3.2.4. set gcenter-ip

A - Introduction

The `gcenter-ip` command of the `set` sub-group enables specifying the IP address of the GCenter to which the GCap will be paired.

Note

The GCap uses this IP address during pairing to connect to the GCenter via SSH and retrieve the GCenter fingerprint.

---

B - Prerequisites

• User: setup

• Dependencies: the detection engine must be switched off

---

C - Command

`set gcenter-ip {GCenter-IP}`

---

D - Procedure

The command prompt is displayed.

(gcap-cli)

1. Enter the command

   set gcenter-ip 192.168.1.1
   

2. Validate

   The system displays the result

Setting GCenter IP to 192.168.1.1

---