5.5.1. Configuring the GCap for the first connection

5.5.1.1. Introduction

The procedure described here explains how to set up the GCap when it is first installed.


5.5.1.2. Prerequisites

  • User: setup


5.5.1.3. Preliminary operations

  • Check that the LUKS key is connected to the GCap.

Note

If there is no LUKS key or if it is the wrong one, the operating system will not be able to access the contents on the hard drives.

In case of problems, check:
  • whether the correct key is used and not one from another GCap...

  • the USB port is working properly: change the USB port

Note

The first time you log in to the GCap, a prompt to change your password will be displayed.

Make sure the keyboard configuration is correct (fr or en version).


5.5.1.4. Procedure

  • Manage passwords (passwords, SSH keys, and the like): see the Manage accounts table.

  • Manage network interfaces gcp0 and gcp1: see the Manage network table.

    • configure the IP addressing

    • enter the GCap name and the domain name

    • configure the MTU value if necessary